CHINA SCOTON OILFIELD EQUIPMENT CO., LTD.

The New Drilling Connector Takes the Challenge by Horizontal Wells and Large Displacement Wells

Vallourec recently released the VAM x-force product, a high-performance drilling connector that can perform drilling operations in the most demanding conditions. VAM x-force has the highest torque performance in the rotating-shoulder connection, the longest endurance and the lowest overall cost. Through the combination of traditional double shoulder design and thread profile, VAM x-force has excellent mechanical properties, operational performance and economic benefits. The design of the curve thread increases the surface area of the torque and reduces the stress on the cross section. Therefore, the VAM x-force product has the advantages of long endurance, deep buckle and no need to guide the shoe. The product has high torque and hydraulic performance and it can meet the drilling needs of the most challenging horizontal Wells and large displacement Wells.
Related Article
  • Dual Well Completion Principle

    Dual Well Completion Principle

    April 29, 2018After the oil wellpenetrating through the oil layer and the bottom water layer, the well completionsare implemented in oil and water layer, and the two layers were seperated by apacker. When the well ...view
  • Multilateral Drilling

    Multilateral Drilling

    March 29, 2021Sometimes oil and natural gas reserves are located in separate layers underground and multilateral drilling allows producers to branch out from the main well to tap reserves at different depths.This i...view
  • Maintenance of Mud Pump

    Maintenance of Mud Pump

    April 27, 20181. The mud pump must be installed on a relatively stable foundation. Before operation, carefully check the lubrication condition, fastening condition, and fit clearances between various parts of the ...view
  • Usage & Operation of Safety Joints

    Usage & Operation of Safety Joints

    April 29, 2018(I) Drill stringassemblySafetyjoint installs on the tubing string and operates for drilling, salvaging, wellcleaning, repairing and testing, etc. Its diameter and diameter of the bit portshould be th...view
  • Introduction of Q250 Pneumatic Spinning Wrench

    Introduction of Q250 Pneumatic Spinning Wrench

    April 29, 2018Q250 Pneumatic spinningwrench is a pneumatic roller type spinner used in marine and drillingmechanization industry, with a range of 3 1/2-10 (in) drill rods and drillcollars. In the drilling operation...view
  • Automated drilling

    Automated drilling

    March 29, 2021Automated drilling is one of the oil industry’s most important innovation targets.The sources now being tapped, such as shale gas and coal-bed methane, require a very large number of wells, and autom...view
  • TEL:+86-029-81138812
  • FAX:+86-029-62827812
  • EMAIL:sales@scotonpetro.com
  • ADDRESS:Hi-Tech Development zone, Xi'an China